-
-
Tip: insert all zip ties first, then tighten them all at the same time.
-
It's much faster than inserting and tightening each zip tie separately.
-
-
-
5'' zip ties
-
Nothing complicated here.
-
-
-
5'' zip ties
-
On the left side, the zip ties double as a holder for the LCD wires.
-
Position the zip tie head in the corner between the Brace and the Top. This is a carrying handle - you don't want the head on the outside scratching you.
-
-
-
5'' zip ties
-
-
-
5'' zip ties
-
-
-
Tip: If you're using a zip tie gun, you will find attaching the Back easier if you insert the zip ties in the direction towards you first.
-
Otherwise you won't be able to use the zip tie gun on the Back (which is fine, too).
-
-
-
5'' zip ties
-
-
-
Random tip: there's a holder for your hex keys on the top right :-)
-
-
-
Acrylic Back Cover
-
M3x12 screws
-
-
-
The first time you try to attach the back cover, you may need to align the holes.
-
-
-
M3x12 screws
-
-
-
Insert the aluminum build plate.
-
-
-
Insert the Extruder into the X carriage.
-
Don't forget to connect all the wires.
-
Do not pinch the hotend wires. Make sure they go underneath the x carriage
-