You're viewing a previously published revision of this guide.  View latest revision

Older
Aug 14, 2017 - 12:08:46
Aug 14, 2017 - 12:08:08 Aug 14, 2017 - 12:08:46 May 18, 2017 - 12:05:11 May 17, 2017 - 06:05:07 May 17, 2017 - 06:05:59 May 17, 2017 - 03:05:57 May 17, 2017 - 03:05:55 May 17, 2017 - 01:05:22 May 17, 2017 - 01:05:32
Newer

Final Touches

Written By: Filip Goc
  • Comments: 2
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

13

Time Required

Suggest a time??

Sections

4

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

  1. Tip: insert all zip ties first, then tighten them all at the same time.

    • Tip: insert all zip ties first, then tighten them all at the same time.

    • It's much faster than inserting and tightening each zip tie separately.

  2. 5'' zip ties Nothing complicated here. Nothing complicated here.

    • 5'' zip ties

    • Nothing complicated here.

  3. 5'' zip ties On the left side, the zip ties double as a holder for the LCD wires. Position the zip tie head in the corner between the Brace and the Top. This is a carrying handle - you don't want the head on the outside scratching you.

    • 5'' zip ties

    • On the left side, the zip ties double as a holder for the LCD wires.

    • Position the zip tie head in the corner between the Brace and the Top. This is a carrying handle - you don't want the head on the outside scratching you.

  4. 5'' zip ties

    • 5'' zip ties

  5. 5'' zip ties

    • 5'' zip ties

  6. Tip: If you're using a zip tie gun, you will find attaching the Back easier if you insert the zip ties in the direction towards you first. Otherwise you won't be able to use the zip tie gun on the Back (which is fine, too). Otherwise you won't be able to use the zip tie gun on the Back (which is fine, too).

    • Tip: If you're using a zip tie gun, you will find attaching the Back easier if you insert the zip ties in the direction towards you first.

    • Otherwise you won't be able to use the zip tie gun on the Back (which is fine, too).

  7. 5'' zip ties

    • 5'' zip ties

  8. Random tip: there's a holder for your hex keys on the top right :-)

    • Random tip: there's a holder for your hex keys on the top right :-)

  9. Acrylic Back Cover

    • Acrylic Back Cover

    • M3x12 screws

    • The first time you try to attach the back cover, you may need to align the holes.

  11. M3x12 screws M3x12 screws

    • M3x12 screws

  12. Insert the aluminum build plate. Insert the aluminum build plate.

    • Insert the aluminum build plate.

    • Insert the Extruder into the X carriage.

    • Don't forget to connect all the wires.

    • Do not pinch the hotend wires. Make sure they go underneath the x carriage

Author

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored