Y Motor Bracket (easy kit)

Written By: Filip Goc
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Introduction

Not the guide you are looking for?

Go back to the ⇤ Easy Kit Build Flow.

  1. Edit
  2. Edit
  3. Edit
  4. Edit
  5. Edit
  6. Edit

  7. When tightening against plastic (frame, printed parts...), always hold the short side of the hex key to avoid over-tightening and damaging the part.

    • When tightening against plastic (frame, printed parts...), always hold the short side of the hex key to avoid over-tightening and damaging the part.

    Edit

  8. Avoid alignment issues by tightening the screws little by little in a diagonal pattern.

    • Avoid alignment issues by tightening the screws little by little in a diagonal pattern.

    • This is called "cross-tightening", and you should do it every time* you have more than one screw to tighten.

    • * even when you're not building a JellyBOX

    Edit

    • ▶ Video: Cross-Tightening (20s)

    Edit

  10. The Y motor bracket is assembled. All the naysayers shall be silent now. You are doing this. The Y motor bracket is assembled. All the naysayers shall be silent now. You are doing this.

    • The Y motor bracket is assembled. All the naysayers shall be silent now. You are doing this.

    Edit
Conclusion

What's Next?

Get back to the ⇤ Easy Kit Build Flow and continue with the next guide.

Author

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

0 Comments

Add Comment