Skip to main content

Introduction

Not the guide you are looking for?

Go back to the ⇤ Makers Kit Build Flow.

  1. Remove the extruder
    • Remove the extruder

  2. Insert wisdom here.
    • Insert wisdom here.

  3. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  4. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

    • ▶ Video: Tighten the X Belt (30s)

  5. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  6. IF you cannot achieve moderate tightness (watch the included video) with one zip tie, you can add a 2nd one.
    • IF you cannot achieve moderate tightness (watch the included video) with one zip tie, you can add a 2nd one.

  7. Tighten the Y belt zip tie just like you just have tightened the X belt zip tie.
    • Tighten the Y belt zip tie just like you just have tightened the X belt zip tie.

    • ▶ Video: Tighten the Y Belt (30s)

    • ▶ Video: Tighten the Y Belt

Conclusion

What's Next?

Get back to the ⇤ Makers Kit Build Flow and continue with the next guide.

Filip Goc

Member since: 01/14/2016

18,009 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

Community

2 Members

490 Guides authored

0 Comments

Add Comment