Print the Part Scraper

Written By: Filip Goc
  • Comments: 3
  • Favorites: 0

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Introduction

Not the guide you are looking for?

Go back to the ⇤ Easy Kit Build Flow.

  1. The Part Scraper shall help you remove the printed parts from the build platform without hurting yourself or printing surface. In the bottom left 'tool holders' area of your JellyBOX, there's a slot that holds the scraper, too!

    • The Part Scraper shall help you remove the printed parts from the build platform without hurting yourself or printing surface.

    • In the bottom left 'tool holders' area of your JellyBOX, there's a slot that holds the scraper, too!

    Edit

  2. Download your Part Scraper pre-sliced for PLA or PETG (PETG is stronger) and print it. Download Scraper in PETG
    Edit

  3. This is a plastic razor blade (yes, plastic razor blade). It's not as sharp as a metal one, and it gets damaged, but it's cheap and it cannot damage any print surface or seriously hurt anyone.

    • This is a plastic razor blade (yes, plastic razor blade). It's not as sharp as a metal one, and it gets damaged, but it's cheap and it cannot damage any print surface or seriously hurt anyone.

    • Your razor may be a different color than orange. Notably, black!

    • Plastic razors are used in the automotive industry to scrape off stickers from windshields and the car bodies - because they do not damage the car.

    Edit
  4. Edit
  5. Edit
Conclusion

What's Next?

Get back to the ⇤ Easy Kit Build Flow and continue with the next guide.

Author

Filip Goc

Member since: 01/14/2016

18,007 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

0 Comments

Add Comment