Skip to main content

Introduction

Not the guide you are looking for?

Go back to the ⇤ Makers Kit Build Flow.

  1. The Part Scraper shall help you remove the printed parts from the build platform without hurting yourself or printing surface. In the bottom left 'tool holders' area of your JellyBOX, there's a slot that holds the scraper, too!
    • The Part Scraper shall help you remove the printed parts from the build platform without hurting yourself or printing surface.

    • In the bottom left 'tool holders' area of your JellyBOX, there's a slot that holds the scraper, too!

  2. Download your Part Scraper pre-sliced for PLA or PETG (PETG is stronger) and print it. Download Scraper in PETG
  3. This is a plastic razor blade (yes, plastic razor blade). It's not as sharp as a metal one, and it gets damaged, but it's cheap and it cannot damage any print surface or seriously hurt anyone.
    • This is a plastic razor blade (yes, plastic razor blade). It's not as sharp as a metal one, and it gets damaged, but it's cheap and it cannot damage any print surface or seriously hurt anyone.

    • Your razor may be a different color than orange. Notably, black!

    • Plastic razors are used in the automotive industry to scrape off stickers from windshields and the car bodies - because they do not damage the car.

Conclusion

What's Next?

Get back to the ⇤ Makers Kit Build Flow and continue with the next guide.

Filip Goc

Member since: 01/14/2016

18,009 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

Community

2 Members

490 Guides authored

0 Comments

Add Comment