Video Overview
-
-
When your JellyBOX is on, you should hear and see the hotend fan spinning.
-
Else the hotend will eventually overheat and you will get a terrible print quality or a even clogged hotend.
-
-
-
The rest of the Preflight Check is conveniently pre-cooked in your JellyBOX.
-
Go to Maintenance > Preflight Check and go down the list.
-
-
-
Prerequisite: Release the motors so that you can move them by hand freely.
-
Maintenance > Release motors
-
-
-
Make sure the hotend temperature is rising, then click to continue the Preflight.
-
Target temperature
-
Current temperature
-
-
-
Make sure the bed temperature is rising, then click to continue the Preflight.
-
Target temperature
-
Current temperature
-
-
-
PS: Your Preflight Check may still have items 9. Load Filament and 10. Eject Filament. Simply SKIP THESE for now. We will load and eject filament a bit later as a part of your First Print.
-
These functions will be removed from the Preflight Check in the future. They are identical to the Load and Eject functions available through the Material Menu.
-