Tighten well else you risk overheating.
If the screw is loose, the electricity will not flow as well, which will heat up the involved components, possibly to a fault.
Tighten well else you risk overheating.
If the screw is loose, the electricity will not flow as well, which will heat up the involved components, possibly to a fault.
It is important that the heatsinks do NOT touch the pins on the drivers.
The heatsinks could connect the driver pins and burn out the driver '.
We actually put a protective isolating liquid over the pins to protect against shortage, but it's better to just leave the pins alone.
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.
Single Step
Full Guide
Small - 600px
Medium - 800px
Large - 1200px
Preview