Skip to main content

Support Questions

Ask a Question

There are no questions. Be the first to ask a question!

JellyBOX Usage Guides

Your First Print

Your First Print

You’re here because you have either just built your JellyBOX or you have inherited one already built and now you want to print something, but don’t know how.

In this guide, you’ll learn how to calibrate the 1st layer height on your JellyBOX Original or 2 and launch a print from an SD card.

Calibrating the 1st layer height is a necessary prerequisite to any successful print. This procedure will take you probably about half an hour the first time, and about 5 minutes in subsequent runs.

Calibrate The 1st Layer Height

Calibrate The 1st Layer Height

(A subset of the First Print).

You’re here because you have issue with your prints not sticking to your bed or because your nozzle rams into your bed seemingly trying to destroy you JellyBOX.

In this guide, you’ll learn how to calibrate the 1st layer height on your JellyBOX Original or 2.

Calibrating the 1st layer height is a necessary prerequisite to any successful print. This procedure will take you probably about half an hour the first time, and about 5 minutes in subsequent runs.

JellyBOX Original Build Instructions

JellyBOX Original or JellyBOX 1 is the original crowd pleaser and workhorse. If you got your JellyBOX before mid-2018, then this is what you have :-)

JellyBOX Original Upgrades

Are You Looking for JellyBOX 2 Build Instructions?

JellyBOX 2