Skip to main content

Here's HowTo use Your JellyBOX 2

Whether you have built your JellyBOX (right on!) or whether you inherited one, here's what you need to know.

Essential Prerequisites: If you have not built the JellyBOX yourself, you may want to check out the Preflight Check and Your First Print sections of the build guide.

You will learn HowTo

  • Load and unload filament
  • Calibrate the 1st layer height (!)
  • and more

Cura Slicer

You want to start slicing and printing your 3D models of Your choosing as fast as you can. Herein lies the magic.


Add Comment