If washers are used under screws - then makers will put them also under screws on Y-AXIS - and this is problem. Heads of screws are too high - so screw can be hit by bed - as is movin over.
Two washers should be undee nuts, not under screw. There is option nto to use M2 wshers at all - it will no make real difference and it is too easy to loose.
If washers are used under screws - then makers will put them also under screws on Y-AXIS - and this is problem. Heads of screws are too high - so screw can be hit by bed - as is movin over.
Two washers should be undee nuts, not under screw. There is option nto to use M2 wshers at all - it will no make real difference and it is too easy to loose.