Video Overview
Video Walkthrough
-
-
X carriage
-
Quick release clamp
-
Quick release knob
-
M4 oversize washer
-
M4x25 hex head bolt
-
Any hex key
-
-
-
Drive the bolt through the hexagonal hole inside the carriage in upwards direction.
-
Slide the quick release clamp over the bolt.
-
Put the M4 oversize washer onto the bolt.
-
Finger-tighten in place with the M4 knob. Pro Tip: Use a hex key to hold the bolt in place
-
Almost done!
Finish Line