Skip to main content
  1. Acrylic Top Skate bearings
    • Acrylic Top

    • Skate bearings

    • Spool roller rods

  2. Pre-install the bearings onto the rods.
    • Pre-install the bearings onto the rods.

  3. Pre-install 5'' zip ties into the Top.
    • Pre-install 5'' zip ties into the Top.

    • In this picture, the Top is upside down; notice the etched writing is reversed.

  4. Ta-daaa. Ta-daaa.
    • Ta-daaa.

  5. Snap the filament guide in place. Snap the filament guide in place. Snap the filament guide in place.
    • Snap the filament guide in place.

  6. Green corner clips.
    • Green corner clips.

Finish Line

2 other people completed this guide.

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

0 Comments

Add Comment