You're viewing a previously published revision of this guide.  View latest revision

Older
May 17, 2017 - 07:05:02
May 18, 2017 - 12:05:25 May 17, 2017 - 07:05:02 May 17, 2017 - 07:05:03 May 17, 2017 - 07:05:00 May 17, 2017 - 07:05:43
Newer

Install the Brace

Written By: Filip Goc
  • Comments: 0
  • Favorites: 0
  • Completions: 3

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

2

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

  1. Brace Front

    • Brace Front

    • Brace Back

  2. 4'' zip tie Use a soft cloth to clean the brace parts. Any fingerprints or dirt stuck between the two will stay there... forever.

    • 4'' zip tie

    • Use a soft cloth to clean the brace parts. Any fingerprints or dirt stuck between the two will stay there... forever.

  3. 5'' zip ties Insert one side of the Brace first. Gently flex the sides of the printer to get the other side of the Brace into position.

    • 5'' zip ties

    • Insert one side of the Brace first.

    • Gently flex the sides of the printer to get the other side of the Brace into position.

Author

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored