Skip to main content
  1. First Check to be sure that the Part is not too squished. this Parts is easily  unusable by being too flat Remove Any blemishes from the Part.
    • First Check to be sure that the Part is not too squished. this Parts is easily unusable by being too flat

    • Remove Any blemishes from the Part.

  2. Use a Small Screwdriver and a small circular Blade to Remove the supports from the part and clean any remnants. You should be Done, one last visual inspection to make sure you didnt miss anything
    • Use a Small Screwdriver and a small circular Blade to Remove the supports from the part and clean any remnants.

    • You should be Done, one last visual inspection to make sure you didnt miss anything

Finish Line

One other person completed this guide.

Charles Straub

Member since: 03/25/2016

129 Reputation

4 Guides authored

Team

team manufacturing Member of team manufacturing

Community

5 Members

494 Guides authored

0 Comments

Add Comment