Electronics

Written By: Filip Goc
  • Comments: 1
  • Favorites: 0

Difficulty

Moderate

Steps

42

Time Required

Suggest a time??

Sections

6

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Introduction

Not the guide you are looking for?

Go back to the ⇤ Easy Kit Build Flow.

  1. Edit
  2. Edit
  3. Edit

  4. PS: Don't worry about these three. They are used for the Raspberry Pi upgrade. You may use them later or not. PS: Don't worry about these three. They are used for the Raspberry Pi upgrade. You may use them later or not.

    • PS: Don't worry about these three. They are used for the Raspberry Pi upgrade. You may use them later or not.

    Edit

  5. All this beauty... All this beauty... All this beauty...

    • All this beauty...

    Edit
  6. Edit
  7. Edit

  8. These yellow rectangular fuses may be hiding this hole. Fearlessly but gently bend them away.

    • These yellow rectangular fuses may be hiding this hole. Fearlessly but gently bend them away.

    Edit

  9. M3x25 M3x25

    • M3x25

    Edit
  10. Edit
  11. Edit
  12. Edit
  13. Edit
  14. Edit

  15. It is customary to install switches with "OFF" pointing down. This way, when you need to turn the machine off fast (emergency), you can just strike down and let the gravity guide you.

    • It is customary to install switches with "OFF" pointing down. This way, when you need to turn the machine off fast (emergency), you can just strike down and let the gravity guide you.

    Edit

  16. You should know that our BIG FRIENDLY BUTTON is actually a toggle switch. You should know that our BIG FRIENDLY BUTTON is actually a toggle switch.
    Edit
  17. Edit
  18. Edit
  19. Edit
  20. Edit
  21. Edit
  22. Edit
  23. Edit

  24. Tighten well else you risk overheating. If the screw is loose, the electricity will not flow as well, which will heat up the involved components, possibly to a fault. If the screw is loose, the electricity will not flow as well, which will heat up the involved components, possibly to a fault.

    • Tighten well else you risk overheating.

    • If the screw is loose, the electricity will not flow as well, which will heat up the involved components, possibly to a fault.

    Edit
  25. Edit

  26. Tighten well else you risk overheating. If the screw is loose, the electricity will not flow as well, which will heat up the involved components, possibly to a fault.

    • Tighten well else you risk overheating.

    • If the screw is loose, the electricity will not flow as well, which will heat up the involved components, possibly to a fault.

    Edit
  27. Edit
  28. Edit
  29. Edit
  30. Edit

  31. M3x16 M3x16 M3x16

    • M3x16

    Edit
  32. Edit

  33. M3x16 M3x16 M3x16

    • M3x16

    Edit
  34. Edit

  35. Twisting a wire can be art. Twisting a wire can be art. Twisting a wire can be art.

    • Twisting a wire can be art.

    Edit

  36. What an elegant twist.

    • What an elegant twist.

    Edit
  37. Edit
  38. Edit
  39. Edit

  40. The ridges of the heatsink should be vertical so that the heat fleets faster.

    • The ridges of the heatsink should be vertical so that the heat fleets faster.

    • Heat has a tendency to rise up.

    Edit

  41. It is important that the heatsinks do NOT touch the pins on the drivers.

    • It is important that the heatsinks do NOT touch the pins on the drivers.

    • The heatsinks could connect the driver pins and burn out the driver'.

    • We actually put a protective isolating liquid over the pins to protect against shortage, but it's better to just leave the pins alone.

    Edit
  42. Edit
Conclusion

What's Next?

Get back to the ⇤ Easy Kit Build Flow and continue with the next guide.

Author

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

0 Comments

Add Comment