Skip to main content

Introduction

In this guide, we assemble and incorporate the Brace.

  1. Front Brace piece Back Brace piece
    • Front Brace piece

    • Back Brace piece

    • 4" zip tie (1)

    • 6" zip tie (2)

    • Vise Grip

    • Side Cutters

    • A soft cloth

  2. Use a soft cloth to clean the brace parts.
    • Use a soft cloth to clean the brace parts.

    • Any fingerprints or dirt stuck between the two will show.

  3. Place the front brace on top of the back brace.
    • Place the front brace on top of the back brace.

  4. Use a 4" zip tie through the two central holes. Tighten the zip tie with vice grips.
    • Use a 4" zip tie through the two central holes.

    • Tighten the zip tie with vice grips.

    • Cut the free end with side cutters.

  5. Gently flex left and the right acrylic pieces to put the brace into position.
    • Gently flex left and the right acrylic pieces to put the brace into position.

    • (See video if necessary!)

    • Make sure the cut out in the brace is on the left side.

  6. Use two 6" zip ties to hold the brace in place. Place the heads of the ties behind the brace.
    • Use two 6" zip ties to hold the brace in place.

    • Place the heads of the ties behind the brace.

    • Use vice grips and side cutters to tighten and clean up the connection.

Finish Line

Filip Goc

Member since: 01/14/2016

18,009 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

Community

2 Members

490 Guides authored

0 Comments

Add Comment