Skip to main content

Introduction

In this guide, we put together the basis of the JellyBOX frame, or, "box."

Fancy an animated gif? http://i.imgur.com/1Kzz9RE.gif

Video Overview

  1. Acrylic Bottom Acrylic Inner Back Acrylic Left
    • Acrylic Bottom

    • Acrylic Inner Back

    • Acrylic Left

    Make sure to peel your acrylic first!

    Luke Shaw - Reply

    Absolutely :-)

    (Or not. Leaving the film on on some parts like the bottom or inner back can be quite elegant; just make sure it's by choice!)

    Filip Goc -

  2. Find "Start Here" etched on the bottom panel. That's your bottom left. Find "Start Here" etched on the bottom panel. That's your bottom left.
    • Find "Start Here" etched on the bottom panel. That's your bottom left.

  3. Align the etched rectangular pattern on Bottom with Left. 5'' zip ties
    • Align the etched rectangular pattern on Bottom with Left.

    • 5'' zip ties

    • Tighten by hand only.

    • Position the zip tie heads on the bottom. (bottom of Bottom :-)

  4. Add the Inner Back. 5'' zip ties
    • Add the Inner Back.

    • 5'' zip ties

    • Tighten by hand only.

    • Position the zip tie heads on the bottom. (bottom of Bottom :-)

  5. Add Right. 5'' zip ties Tighten by hand only.
    • Add Right.

    • 5'' zip ties

    • Tighten by hand only.

    • Position the zip tie heads on the bottom. (bottom of Bottom :-)

  6. Use vice grips to tighten the zip ties and trim the tails with your snips. Regular tight is enough.
    • Use vice grips to tighten the zip ties and trim the tails with your snips.

    • Regular tight is enough.

    • Alternatively, use a zip tie gun.

  7. Done. Done.
    • Done.

Filip Goc

Member since: 01/14/2016

18,009 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

Community

2 Members

490 Guides authored

2 Comments

This step took us about 10 minutes. Can I suggest adding "Peel off all the plastic coatings before assembling?"

Justin Price - Reply

Great point on the peeling. We used to have a whole section on Acrylic Peeling, but it didn't survive recent build streamlining. I'll inject it somewhere.

Filip Goc -

Add Comment