Basic Frame

Written By: Filip Goc
  • Comments: 4
  • Favorites: 0

Difficulty

Moderate

Steps

7

Time Required

00:05:00 - 00:12:00

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Introduction

In this guide, we put together the basis of the JellyBOX frame, or, "box."

Fancy an animated gif? http://i.imgur.com/1Kzz9RE.gif

Video Overview

  1. Acrylic Bottom Acrylic Inner Back Acrylic Left

    • Acrylic Bottom

    • Acrylic Inner Back

    • Acrylic Left

    Edit

  2. Find "Start Here" etched on the bottom panel. That's your bottom left. Find "Start Here" etched on the bottom panel. That's your bottom left.

    • Find "Start Here" etched on the bottom panel. That's your bottom left.

    Edit

  3. Align the etched rectangular pattern on Bottom with Left. 5'' zip ties

    • Align the etched rectangular pattern on Bottom with Left.

    • 5'' zip ties

    • Tighten by hand only.

    • Position the zip tie heads on the bottom. (bottom of Bottom :-)

    Edit

  4. Add the Inner Back. 5'' zip ties

    • Add the Inner Back.

    • 5'' zip ties

    • Tighten by hand only.

    • Position the zip tie heads on the bottom. (bottom of Bottom :-)

    Edit

  5. Add Right. 5'' zip ties Tighten by hand only.

    • Add Right.

    • 5'' zip ties

    • Tighten by hand only.

    • Position the zip tie heads on the bottom. (bottom of Bottom :-)

    Edit

  6. Use vice grips to tighten the zip ties and trim the tails with your snips. Regular tight is enough.

    • Use vice grips to tighten the zip ties and trim the tails with your snips.

    • Regular tight is enough.

    • Alternatively, use a zip tie gun.

    Edit

  7. Done. Done.

    • Done.

    Edit

Author

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

2 Comments

This step took us about 10 minutes. Can I suggest adding "Peel off all the plastic coatings before assembling?"

Justin Price - Reply

Great point on the peeling. We used to have a whole section on Acrylic Peeling, but it didn't survive recent build streamlining. I'll inject it somewhere.

Filip Goc -

Add Comment