Skip to main content
  1. Rotate the Z rod to move the whole X assembly about this high. Rotate the Z rod to move the whole X assembly about this high.
    • Rotate the Z rod to move the whole X assembly about this high.

  2. Get some of that lithium grease from the little pack in the tools box.
    • Get some of that lithium grease from the little pack in the tools box.

  3. Apply the grease below the zx coupler. As the X assembly will travel up and down during future prints, it will distribute the grease.
    • Apply the grease below the zx coupler.

    • As the X assembly will travel up and down during future prints, it will distribute the grease.

Finish Line

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

0 Comments

Add Comment