03. X Assembly Fans and the Z Probe

Written By: Filip Goc (and one other contributor)
  • Comments: 4
  • Favorites: 0

Difficulty

Moderate

Steps

38

Time Required

Suggest a time??

Sections

5

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

  1. Edit

  2. M3x15 plastite screw M3x15 plastite screw

    • M3x15 plastite screw

    Edit
  3. Edit
  4. Edit
  5. Edit
  6. Edit
  7. Edit

  8. As usual, don't over-tighten ;-) These are specialty 'plastite' screws that resist vibrations. Tightening too much will only damage your parts.

    • As usual, don't over-tighten ;-)

    • These are specialty 'plastite' screws that resist vibrations. Tightening too much will only damage your parts.

    Edit
  9. Edit
  10. Edit

  11. M3x12 M3x12

    • M3x12

    Edit

  12. M3x12

    • M3x12

    Edit

  13. Do NOT over-tighten. There's absolutely no need to tighten the screw with all your force. You could break your fan mount or even pull out the brass threaded insert from the x carriage. The springiness of the part will provide some pressure to resist vibrations, but only if you do not over-tighten the screw.

    • Do NOT over-tighten.

    • There's absolutely no need to tighten the screw with all your force. You could break your fan mount or even pull out the brass threaded insert from the x carriage.

    • The springiness of the part will provide some pressure to resist vibrations, but only if you do not over-tighten the screw.

    • (M3x12)

    Edit
  14. Edit

  15. Leave the zip tie a bit loose. The wire should be able to slide. Leave the zip tie a bit loose. The wire should be able to slide. Leave the zip tie a bit loose. The wire should be able to slide.

    • Leave the zip tie a bit loose. The wire should be able to slide.

    Edit
  16. Edit
  17. Edit

  18. Plastite screws Plastite screws

    • Plastite screws

    Edit
  19. Edit
  20. Edit
  21. Edit
  22. Edit
  23. Edit
  24. Edit

  25. M3x10 Jun 12, 2018 erratum alert: If you don't see any M3x10 in your kit, please use M3x12. They'll work just fine.

    • M3x10

    • Jun 12, 2018 erratum alert: If you don't see any M3x10 in your kit, please use M3x12. They'll work just fine.

    Edit
  26. Edit
  27. Edit
  28. Edit
  29. Edit
  30. Edit

  31. Marvel at your skills of assemblage. Marvel at your skills of assemblage. Marvel at your skills of assemblage.

    • Marvel at your skills of assemblage.

    Edit
  32. Edit

  33. M3x12 M3x12

    • M3x12

    Edit

  34. M3x12

    • M3x12

    Edit
  35. Edit

  36. M3x12

    • M3x12

    • Preferably, tighten in the 'down' position.

    • Only tighten this screw lightly.

    Edit
  37. Edit

    • ▶ Video: JellyBOX 2 Build: X Mechanical Checkpoint #2

    Edit
Finish Line

Author

with 1 other contributor

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

0 Comments

Add Comment