02. Assemble the Extruder

Written By: Filip Goc (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

27

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

  1. Edit

  2. Insert wisdom here.

    • Insert wisdom here.

    Edit

  3. M3x10 socket head M3x10 socket head

    • M3x10 socket head

    Edit
  4. Edit

  5. M3x30 socket head M3x30 socket head

    • M3x30 socket head

    Edit
  6. Edit

  7. M3x16 socket head

    • M3x16 socket head

    Edit
  8. Edit

    • ▶ Video: Feeder Bearing (3s, no narration)

    • The bearing should spin. If it doesn't, loosen the screw a little bit.

    Edit

  10. M3x16 socket head

    • M3x16 socket head

    Edit

  11. M3x16 socket head M3x16 socket head

    • M3x16 socket head

    Edit

    • ▶ Video: Loose Latch (3s, no narration)

    Edit

  13. M3x30 socket head

    • M3x30 socket head

    Edit
  14. Edit

    • ▶ Video: Feeder Arm Rotating (3s, no narration)

    Edit

  16. Hotend shroud

    • Hotend shroud

    • Hotend fan cover

    • Hotend fan

    • Plastite screws (super smart screws specifically designed not to get loose in plastic) (4)

    Edit

  17. Make sure the LED strip is at the bottom as shown. Make sure the LED strip is at the bottom as shown.

    • Make sure the LED strip is at the bottom as shown.

    Edit

  18. plastite screws plastite screws

    • plastite screws

    Edit
  19. Edit
  20. Edit

  21. M3x25 socket head

    • M3x25 socket head

    Edit
  22. Edit

  23. a short piece of PTFE tubing

    • a short piece of PTFE tubing

    Edit
  24. Edit
  25. Edit

    • ▶ Video: Align the Drive Gear (1min, narration)

    Edit
  27. Edit
Finish Line

Author

with 1 other contributor

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

0 Comments

Add Comment