-
-
The Part Scraper shall help you remove the printed parts from the build platform without hurting yourself or printing surface.
-
In the bottom left 'tool holders' area of your JellyBOX, there's a slot that holds the scraper, too!
-
-
-
Download your Part Scraper pre-sliced for PLA or PETG (PETG is stronger) and print it.
-
-
-
If you know your way around Cura, here's a 3mf file if you want to tinker.
-
If you have troubles with the files, please checkout this short guide on HowTo Download Gcode Files to your computer (many browsers make this difficult!)
-
-
-
This is a plastic razor blade (yes, plastic razor blade). It's not as sharp as a metal one, and it gets damaged, but it's cheap and it cannot damage any print surface or seriously hurt anyone.
-
Your razor may be a different color than orange. Notably, black!
-
Plastic razors are used in the automotive industry to scrape off stickers from windshields and the car bodies - because they do not damage the car.
-
Team
