Skip to main content
  1. Make sure the power switch is in OFF position.
    • Make sure the power switch is in OFF position.

  2. Make sure the area around your LCD controller  is clear of tools or other metal objects as these might connect the exposed pins in the back and destroy your LCD.
    • Make sure the area around your LCD controller is clear of tools or other metal objects as these might connect the exposed pins in the back and destroy your LCD.

    • (Don’t worry, there's no danger to you.)

  3. Turn the JellyBOX on for the first time. This is a historic moment. Be ready to turn if off immediately if anything does not go as planned.
    • Turn the JellyBOX on for the first time. This is a historic moment.

    • Be ready to turn if off immediately if anything does not go as planned.

    • If you smell any hint of smoke from the electronics, turn off!

  4. It's alive! If the LCD does not light up, please contact our support team.
  5. Let loose a little victory dance.
    • Let loose a little victory dance.

  6. 1. Turn off you JellyBOX
    • 1. Turn off you JellyBOX

    • 2. Unplug the power supply

    • 3. Disconnect and stow away the LCD controller and wires

    • This will make the rest of your build more enjoyable :-)

Finish Line

Filip Goc

Member since: 01/14/2016

18,037 Reputation

490 Guides authored

Team

team curriculum Member of team curriculum

2 Members

490 Guides authored

0 Comments

Add Comment