Introduction
Not the guide you are looking for?
Go back to the ⇤ Easy Kit Build Flow.
Video Overview
-
-
When your JellyBOX is on, you should hear and see the hotend fan spinning.
-
Else the hotend will eventually overheat and you will get a terrible print quality or a even clogged hotend.
-
-
-
The rest of the Preflight Check is conveniently pre-cooked in your JellyBOX.
-
Go to Maintenance > Preflight Check and go down the list.
-
-
-
Prerequisite: Release the motors so that you can move them by hand freely.
-
Maintenance > Release motors
-
-
-
Make sure the hotend temperature is rising, then click to continue the Preflight.
-
Target temperature
-
Current temperature
-
-
-
Make sure the bed temperature is rising, then click to continue the Preflight.
-
Target temperature
-
Current temperature
-
-
-
PS: Your Preflight Check may still have items 9. Load Filament and 10. Eject Filament. Simply SKIP THESE for now. We will load and eject filament a bit later as a part of your First Print.
-
These functions will be removed from the Preflight Check in the future. They are identical to the Load and Eject functions available through the Material Menu.
-
Congrats! Your JellyBOX seems to be functioning properly. We'll add some finishing touches, and we're done.
What's Next?
Get back to the ⇤ Easy Kit Build Flow and continue with the next guide.
Congrats! Your JellyBOX seems to be functioning properly. We'll add some finishing touches, and we're done.
What's Next?
Get back to the ⇤ Easy Kit Build Flow and continue with the next guide.