-
-
Download and install Printrun from http://www.pronterface.com/
-
Windows note: Printrun is a 'portable' application, so there is no installation process. Just unzip the program and it will run from it's folder (wherever it's located.)
-
Printrun is a 3D printing host software suite which talks to your printer and handles the printing process.
-
Printrun is free, open-source software, licensed under the GNU General Public License, version 3.
-
-
-
Use a USB cable to connect the Jellybox to the Computer.
-
Any USB cable Type B should do, but only the supplied cable is guaranteed to work.
-
Turn the printer on.
-
-
-
Set the baud rate to 250 000.
-
Connect. DONE.
-
TROUBLESHOOT MAC: try different ports if automatic port selection does not work. Try the ones that have 'usb' somewhere in it :-)
-
TROUBLESHOOT PC: How to find and select the correct port for your 3D printer(Windows Edition)
-
Cancel: I did not complete this guide.
One other person completed this guide.
Team
One Comment
Very new to this 3D printing Diego my grandson and we are really excited one thing we notice was that everyone put their hearts into the community. We started with a Anycubice Kobra and now Diego used some of his allowance and bought a Creality C10 Smart Pro, but we think we need to change some settings i downloaded Pronterface now it is saying to connect the jellybox . What is a jallybox? Traying to change the pid getting some stringing . He looked into the problem and that was one of the first thing to do if anyone can help it will be high[y appreciated . Thanks to everyone.